Distribution Blower for Harman Absolute43 Pellet Stove. There are two of these blowers, one on each side of the stove, in the back. The blower is mounted to a frame that is mounted into the stove. To remove the blower, remove the two 5/16″ hex head screws that secure the frame and then remove the motor and frame. The frame will need to be removed from the old motor and attached to the new motor prior to installation.
NOTE: IF your blowers are noisy and vibrating, check the motors by touching them with your hand. If they are hot to the touch, your controller is damaged. Replace the controller and BOTH motors. This will solve the problem. Make sure that your stove is plugged into a proper surge protector to prevent future damage.
Motors Sold individually.