Replacement 8 RPM auger motor with fan blade for MagnuM J3500, 7500, 3500P pellet stove models.
NOTE: If your current auger motor is held in place by 4 screws (each about 3″ long) and has a coupler attached to the auger motor shaft then, it is highly recommended you upgrade to the latest auger system. The parts needed are MF3636 and MF3553. Failure to upgrade to the current system may cause the gears inside of the new auger motor to break or the motor itself to burn up and would not be a warranty issue.
NOTE for Countryside units: If your stove was made before 2010 then check to make sure your auger shaft is 1 1/2″ in diameter. If it is 1 1/2″ in diameter then this is the correct motor. If it has a 1″ diameter then you would need the motor # MF3539.